Diamondlab
Book a lab visit

Agriculture · Residue screening

Tracing antimicrobial residue in irrigation water

Agricultural holding · 3 irrigation lines 3 sampling days · 15 points in duplicate

A screening workflow was built to locate the source of antimicrobial residue entering an irrigation line before it reached the growing beds.

Laboratory work for this case study

The problem

Leaf samples from one block repeatedly failed a residue screen while the other blocks passed, even though all three blocks were irrigated from the same source. The holding had no way to tell whether the source water, the storage tank or a single line was introducing the residue.

The method

Samples were taken at five points along each line, from source to emitter, on three separate days. Each point was sampled in duplicate with a field blank, and the screen was confirmed with a second method before any point was named as the source. Storage tank sediment was included because sediment accumulates what water only passes through.

The result

The source water and two lines were clear across all sampling days. The residue was located in the storage tank sediment and in the first emitter section of the failing line, which was fed directly from that tank. Cleaning the tank and flushing that section removed the failure at the next harvest screen.

Back to all case studies

Next step

Bring us the observation you already have

A case usually starts with a result that does not separate cause from coincidence. That is enough to begin.